অসমীয়া   বাংলা   बोड़ो   डोगरी   ગુજરાતી   ಕನ್ನಡ   كأشُر   कोंकणी   संथाली   মনিপুরি   नेपाली   ଓରିୟା   ਪੰਜਾਬੀ   संस्कृत   தமிழ்  తెలుగు   ردو

Storage insect Pests management gadgets from TNAU

TNAU insect probe trap

The use of trap is relatively a new method of detecting trapping insects in stored grains. The basic components of a TNAU probe trap consist of three important parts: A main tube, insect trapping tube and a detachable cone at the bottom. Equispaced perforations of 2 mm diameter are made in the main tube.

Probe Trap

Concept : Insects love “AIR” and move towards air. This behaviour of the insect is exploited in this technology.

Method of working : The insect trap has to be kept in the grain like rice, wheat etc., vertically with the white plastic cone downside as shown the figure. The top red cap must be with the level of the grain. Insects will move towards air in the main tube and enter through the hole. Once the insect enters the hole it falls down into the detachable white cone at the bottom. Then there is no way to escape and the insects are trapped forever. The white detachable cone can be unscrewed once in a week and the insects can be destroyed.

Salient Features : No chemicals; No side effects and No maintenance cost.

Efficiency : TNAU Insect traps are excellent insect detection devices in food grains and more effective in the detection of stored grain insects namely Rhyzopertha dominica (F.), Sitophilus cryzae (L.) and Tribolium castaneum (Herbst) in stored food grains both in terms of detection as well as number of insects caught than the standard normal sampling method (by spear sampling). The detection ratio (trap : normal sample) is higher in trap than of normal sampling method by factors ranging from 2 : 1 to 31:1. The insects  catch is also higher in the probe trap than the normal sampling method by factors ranging from 20 : 1 to 121 : 1.

They are also good mass trapping devices when used at 2 – 3 numbers / 25 kg bin (28 cm dia and 39 cm length). They should be placed at top 6 inches of the grain, where the insect activity is seen during early period of storage. They can remove > 80% of the insects within 10 – 20 days.

TNAU pit fall trap

Pitfall traps are used for capturing insects active on grain surface and in other layers of grain. (Monitoring and mass trapping tool).

Standard Model

  • Standard model of pitfall trap has 2 parts, perforate d lid (2 mm (or) 3 mm) and a cone shaped bottom portion.
  • Application of special coating with sticky material on the inner side of cone to hold trapped insects is necessary.
  • This procedure is tedious.

TNAU Model

  • TNAU model has perforated lid, cone shaped bottom which tapers into a funnel shaped trapping tube. pit fall 2
  • Hence sticky coating is dispensed with.
  • Commercial model is in plastic, simple and economical (cost per trap is Rs.25/-only).
  • Easy to handle.

TNAU two-in-one model trap

The probe trap containing the components namely the perforated tube, pitfall mechanism, a collection tube and the cone shaped pitfall trap with a perforated lid and the bottom tapering cone were combined as a single unit.

2 in 1 Trap

Combination of probe and pitfall increase the trapping efficiency of insects. Best suited for pulse beetles as they are seen only on grain surface wandering here and there. It does not  require tedious procedures like coating  the inner surface  of pitfall cone with sticky materials before trapping to hold pulse beetles. Beetles are captured alive in this trap, which may facilitate release of pheromone and there by attract more insects.

Indicator Device

It consists of a cone shaped perforated cup (3mm perforation) with a lid at the top. The cup is fixed at the bottom with a container and circular dish, which are to be smeared with sticky material like vaseline.

Farmers, before storing their pulses, should take 200 g of pulses to be stored and put them in the cup. When the field carried over beetles start emerging, due to their wandering behaviour, they enter the perforations and get slipped off and fall into the trapping portions. As they stick on to the sticky materials, farmers can easily locate the beetles and can take out the bulk-stored pulses for sun drying. The device with 2mm perforations can be used for cereals.

This will help in eliminating the initial population, which acts as the major source for further build up. Thus, timely detection will help the farmers to preserve their valuable pulses during storage. The device is being popularised.

TNAU Automatic Insect Removal Bin

TNAU insect removal bin can remove insect automatically. The structure has 4 major parts namely outer container, inner perforated container, collection vessel and the lid. The model exploits wandering behaviour of stored product insects as well as the movement of these insects towards well aerated regions. The grains are held in the specially designed inner perforated container. The space between inner and outer container provides good aeration for the insects. Insects, while wandering, enter the perforation to reach the aerated part and while doing so, get slipped off and fall into the collection vessel through a pitfall mechanism provided in the collection vessel. In order to quickly collect the insects, as and when they emerge from grains, perforated (2 mm) rods are fixed in the inner container.

removal bin

The container will be useful for storing rice, wheat, broken pulses, coriander etc. The insects such as rice weevil, lesser grain borer, red flour beetle, saw toothed beetle, which are commonly found attacking stored grains can be removed automatically by storing grains in this container. Within a very short period of 10 days a majority of the insects (more than 90 per cent) can be removed from the grains. The containers are  available in 2 kg, 5  kg, 25 kg, 100 kg and 500 kg capacities.

Efficiency : Grains (paddy and sorghum) stored in Automatic insect  removal bin (100 kg and 500 kg) recorded only 1 – 4%  damage  by insects compared to 33 to 65% damage in ordinary bin after 10 months of storage. The population of insects (R. dominica, S. oryzae) ranged from 0   – 2/kg in grain stored in 100 kg Automatic insect removal bin compared to 5 – 191 / kg in ordinary bin after 10 months of storage.

UV – light trap for grain storage godowns

The UV light trap mainly consists of an ultra-violet source (4 W germicidal lamp). The lamp produces ultra-violet rays of peak emission around 250 nano meter. The light is fitted at the centre of a funnel of 310 mm diameter at the top and  35  mm diameter at the bottom. The bottom end of the funnel is attached with a transparent plastic container for collecting the trapped insects. To hang the unit at desired points, three hooks have been provided at the periphery of   the   funnel. The unit is also provided with a tripod stand.

UV Trap

The UV light trap can be placed in food grain storage godowns at 1.5 m above ground level, preferably in places around warehouse corners, as it has been observed that the insect tends to move towards these places during the evening hours. The trap can be operated during the night hours. The light trap  attracts stored product insects of paddy like lesser grain borer, Rhyzopertha dominica, red flour beetle, Tribolium castaneum and saw toothed beetle, Oryzaephilus surnamensis in large numbers. Psocids which are of great nuisance in godowns are also attracted in large numbers. Normally 2 numbers of UV light trap per 60 x 20 m (L x B) godown with 5 m height is suggested.

The trap is ideal for use in godowns meant for long term storage of grains, whenever infested stocks arrive in godowns and during post fumigation periods to trap the resistant strains and left over insects to prevent build up of the pest populations. In godowns of frequent transactions the trap can be used for monitoring.

Efficiency : It has been found that two traps kept at the corners of the warehouse (60m x 20m x 5m) can catch around 200 insects/day even from a godown where normal sampling did not show any insect presence, thus indicating its effectiveness as a monitoring and mass trapping device. It has been recorded around 3000 Rhyzopertha dominica on a single day from single trap kept in a paddy godown.

Device to remove insect eggs from stored pulse seeds

Pulses are more difficult to store than cereals as these suffer a great damage during storage by pulse beetle Callosobruchus sp. The main source of infestation by pulse beetle is it’s carry over damage from field to stores which is well known. The present invention is a prototype of a gadget which can successfully crush the eggs of pulse beetle, Callosobruchus chinensis and Callosobruchus maculates which attack stored pulses. The gadget has outer container and an inner perforated container with a rotating rod having fixed with plastic brushes on all sides. The seeds with eggs are to be stored in the perforated container and the rod has to be rotated one full circumference clockwise and anti-clockwise for 10 minutes 3 times a day (morning, noon and afternoon).

Pulse Trap

Due to the splashing action of the brush in rotating rod, the eggs get crushed and thus the damage is prevented. The treatment does not affect the germination of seeds.

Advantages of the invention

  • The device is useful in removing the eggs without affecting the germination
  • Once the eggs are removed there will not be further build up of population during storage of seeds.
  • Removing the eggs laid by the beetles will have a significant impact in arresting the population build up in storage.
  • Farmers generally fear to store pulse seeds because of the pulse beetle damage during storage. The device of the present invention can remove this fear from the farmers mind and thus motivate them “to have their own seeds”.
  • The invention has been patented and commercialized.

Trap for monitoring stored product insects in warehouse

Warehouse Trap

The invention disclosed in this application relates to a device for detecting stored grain insects in bagstacks which comprises a main hollow tube having a diameter in the range of 1.8 to 2.0 cm with equispaced perforation in the range of 1.8 to 2 mm on its upper portion with a bend at one end which ends in a transparent collection unit to collect the insects falling down from the bend, the other end of main tube being closed.

Advantages of the invention

  • The device is useful in detecting stored grain insects in bag stacks of the food grain warehouses without any damage to sacks.
  • The device does not require any bait materials to trap insects.
  • The device is useful in studying the distribution pattern of stored product insects in various layers of bag stacks.
  • The device will be useful to validate the effect of fumigation by using it immediately after fumigation, in different layers of the fumigated stacks.
  • The device will also be useful at farm level when farmers store their produce in bags.

TNAU Stored Grain Insect Management Kit

TNAU Kit

 

Food grains are stored for varying periods to ensure proper and balanced public distribution throughout the year. Among the biotic and abiotic factors which affects grains / seeds in storage, insect plays a major role in the deterioration of grains / seeds causing both qualitative and quantitative losses. Often the presence of insects in store houses are felt only when they are hovering and flying around, by which time enormous loss and population build up of insects might have occurred. Hence, timely detection of the stored grain insects will help to prevent heavy losses.

TNAU has developed devices that exploit the wandering behaviour of the insects and help in timely detection of insects in stored produce leading to timely control. These include TNAU probe trap, TNAU pit fall trap, two in one model trap, indicator device, Automatic insect removal bin, UV-light trap technology, Egg removal device and Stack Trap. These devices have been widely used in many places and have received State and National recognitions.

Hence, the Department of Agricultural Entomology, Centre for Plant Protection Studies, TNAU, Coimbatore has developed a “KIT” named as TNAU-Stored Grain Insect Pest Management Kit containing prototypes of all the devices along with a CD-Rom about the devices and how to use them. This kit will be of great use in popularization of the technologies across the country. The kit will be  an ideal “hands – on training” tool for Education, Extension centers (KVK, Plant clinic, save grain centers) and also for private warehousing.

Source : www.ppqs.gov.in

ਆਖਰੀ ਵਾਰ ਸੰਸ਼ੋਧਿਤ : 3/1/2020



© C–DAC.All content appearing on the vikaspedia portal is through collaborative effort of vikaspedia and its partners.We encourage you to use and share the content in a respectful and fair manner. Please leave all source links intact and adhere to applicable copyright and intellectual property guidelines and laws.
English to Hindi Transliterate